Throwing off the hump is a great way to maximize efficiency in the studio. Starting off with a large amount of clay and centering what you need for each piece as you go can be a time saver.
Alyssa Wagner throws scoops this way so she can make multiple parts quickly and have a number of components to choose from. In today’s post, an excerpt from the November/December 2016 issue of Pottery Making Illustrated, we’ll share how Alyssa approaches the scoop handles. This method of handle making doesn’t have to be just for scoops, though. Try it on a teapot or a batter bowl too!
- Jennifer Harnetty, editor.
Making Handles Off the Hump
by Alyssa Wagner
Throwing as a Tool
I choose to throw the parts for the scoop off of the hump. This allows for me to make multiple parts quickly, giving me a lot of options once I start to assemble. Center a ball of clay on the top of the hump then throw a small bowl. This will be the scoop form. Try experimenting with different rim edges on the bowl and various widths as well. Ask yourself whether it will be a large, deep scoop used for dog food, or it will be small enough to scoop out sugar for coffee. Using a metal rib, compress the inside of the bowl and the outside walls. The thickness of the bowl should correspond to the intention of the scoop. For something like a dog- or cat-food scoop I make the walls of the bowl thicker, to protect it from chipping and wear and tear. When you’re satisfied with the size and the shape, use a needle tool to remove the bowl from the hump, and set it to the side to reach leather hard. Continue to throw several more bowls to give yourself options later.
Gift subscription specials are back! For a limited time, you can subscribe to PMI print edition and share to love with a friend at no additional cost! Every issue of Pottery Making Illustrated contains useful information on techniques, tools, glazes, supplies, and equipment…plus, a magazine can handle a little clay dust, so you can take it into the studio without worry! Sign up for you and a friend today. Maybe your friend will return the favor next year!
Start to throw the handles for the scoops from the same hump of clay. I judge the size of the handles by the size of the bowls, always considering proportion and always making multiples. Make at least four handles for each bowl. Proportion is key when making the handle. If it’s too large, it will weigh the scoop down. If it’s not large enough, it will seem understated. The handles should be relatively thin and be long enough to fit in your hand nicely. I also recommend tapering the handle to make it easier to use, but this is just personal preference. Keep in mind when throwing the handle you want to have a good balance between the scoop and the handle; you want it to be relatively thin, but not so thin as to break off the scoop when using it, and not too heavy that it throws off the balance of the form.
A hollow handle is made by throwing a tall, thin form (1), and trapping a pocket of air inside it by closing off the top (2). Here is where you can really explore many different designs for the handle. Once the air is trapped in the form, it becomes easy to use a rounded metal rib and angled plastic Mudtools rib to refine the shape (3, 4). After you have the desired shape, cut the handle off the hump with a needle tool (5). Set all parts aside to dry. I throw with very little water, so it only takes a short while for the clay to stiffen up.