- Ceramic Arts Daily - http://ceramicartsdaily.org -

Turning an Everyday Throw-Away Item into a Great Pot

Posted By WangLing Chou On March 3, 2014 @ 7:13 am In Daily,Features,Making Ceramic Molds | 10 Comments

wangling_620When WangLing Chou was an international student, she developed a habit of traveling light and repurposing and reusing objects out of necessity. This habit made its way into her clay work as well. In today’s post, an excerpt from the March/April 2014 issue of Pottery Making Illustrated, she shares how she repurposed plastic soda bottles as fun molds for functional pots. – Jennifer Harnetty, editor.

 


 

Preparing the Plastic Mold

 

 

Collect any interesting forms of plastic to be used for potential molds such as soda bottles and food containers. Clean and rinse the plastic with soapy water. Next, use a utility knife or saw to cut out the portion you want to use for the mold.

 


 

No one at the wheel!

Discover all the happy accidents you’ll have when you take your hands off the wheel and learn new skills using Slab Techniques. Join Jim Robison as he provides all the information you need to be confident in working with slabs from how to work the clay, add textures and properly join to adding the finishing touches.

 

 


 

Coat the inside of the plastic mold with a very thin layer of WD-40 and spread it evenly then wipe out the form with a chamois. Avoid using excess WD-40, as it will make the surface of the mold overly slippery and will penetrate the slab.

click to enlarge

click to enlarge

Drill a small hole in the bottom of the plastic bottle to allow air to escape when the slab is pressed inside the mold. Roll out a slab of clay and cut it into shapes to cover the inside of the mold (figure 1). Several sections of slabs will need to be connected together when pressing the inside of a curved plastic bottle and the number of sections will vary according to the size and shape of the form. Press the slab against the mold evenly and then smooth the inside as much as possible before removing it from the mold.

 

Forming a Zoomorphic Teapot

 

 

Wait until the pressed clay is stiff enough to hold its shape, then use a utility knife to carefully cut the soft part of the plastic bottle allowing the form to release from the mold (figure 2).

Smooth out the seams and remove any unwanted texture. During the leather-hard stage, you may model the form further by pushing out the curves, squeezing the excess clay or cutting and reconnecting some sections to alter or even exaggerate the profile. You can use coils or thin slabs to extend the vessel or alter the proportional balance and overall form for the teapot to a desired shape (figure 3).

Use the top portion of another plastic bottle as a mold for the top of the teapot (figure 4). This gives the form a more gradual rounded top as opposed to an abrupt flat one. Make the press mold for the top just as you did for the bottom.

 

Before adjusting and refining the size of the top hole (figure 5), clean the interior while there’s still a big enough hole to access the inside of the teapot. This ensures the joined pieces are well attached and the seam is smoothed.

click to enlarge

click to enlarge

 

Making the Spout and Handle

 

 

To create the basic spout form, use a tapered dowel, either short or long depending on the size spout you need. Roll a clay slab around the dowel and use it to shape the spout. To give the spout more of an organic feeling of an actual chicken beak, try to pull it into a slight curve, then cut the spout to size and attach it to the teapot (figure 5).

The construction of the tail, or handle, involves two mirrored parts formed together to give the impression of an inflated balloon. Cut out the two abstract forms similar to a chicken tail using a pattern to ensure the proportions of each side are the same (figure 6).

 

Next, curl the edges inward in order to achieve the puffy appearance, then connect them, making sure to leave a hole for the air to escape (figure 7).

 

click to enlarge

click to enlarge

Finally, attach the tail in an appropriate place that gives the impression of tail feathers (figure 8). This tail not only serves as part of the chicken but also suggests a teapot’s handle.

 

WangLing Chou is a native of Taiwan. She obtained her MFA from Kent State University in Kent, Ohio. She is currently an assistant professor of art at Louisiana College in Pineville, Louisiana.

 

 

 


 

For great mold making techniques, be sure to download your free copy of Ceramic Mold Making Techniques: Tips for Making Plaster Molds and Slip Casting Clay, Volume II. 

 

 


 

 
 

Article printed from Ceramic Arts Daily: http://ceramicartsdaily.org

URL to article: http://ceramicartsdaily.org/pottery-making-techniques/making-ceramic-molds/turning-an-everyday-throw-away-item-into-a-great-mold/

Copyright © 2008-2012 Ceramic Arts Daily. All rights reserved.