Terra sigillata pottery has been around since the ancient Greeks created their famous black and red pots, but it is certainly not “getting old.” Contemporary potters, such as Sharon Alpren, are making exciting and beautiful terra sigillata ceramics to this day.
In today’s post, an excerpt from the November 2016 issue of Ceramics Monthly, Alpren shares the terra sigillata technique she uses to make her gorgeous textile-inspired bowls. - Jennifer Harnetty, editor.
P.S. Learn how Sharon Alpren switched from a career in retail buying and textiles to one as a studio potter in Melbourne Australia. Read about Alpren’s experiences and see more of her work in in the November 2016 issue of Ceramics Monthly.
Wheel Throwing, Altering, and Applying Terra Sigillata
by Sharon Alpren
Throwing and decorating a bowl
I throw my Bedrock series bowls on the wheel using a richly colored and highly textured stoneware clay (A). After leaving the bowl to firm up for a couple of hours, so it is no longer wet and sticky but still very pliable, I then alter the bowl to give it a more organic shape by squeezing and stretching the clay between my hand and a wooden kidney tool (B).
Ceramics Monthly gift subscriptions are back! Subscribe today and share to love with a friend at no additional cost! In addition to the great studio visits, techniques, exhibition coverage, glaze recipes, and the fascinating stories of ceramic artists living the dream, your next time-and-money-saving tip could be in the next issue. So don't delay! Sign up today!
When the bowl is completely dry, I use a sgraffito tool to incise the lines that will later be filled with black inlay slip (C), then apply an undercoat of white terra sigillata, rubbing it into the textured clay with a soft rag (D). The clay is very dark when fired and the colors require a white undercoat to show up.
The colored terra sigillata is brushed on next (E). Terra sigillata can be rather thin so it may take up to three layers or more to build up sufficient color. I burnish the terra sigillata with a soft rag so that the texture of the clay comes through.
After bisque firing, I inlay a black engobe into the incised lines and sponge off the excess (F). Then, when the piece is bone dry, it is fired in a gas kiln to cone 9, in medium reduction.