Sign up for your FREE subscription to the Ceramic Arts Daily Newsletter and we will give you Pottery Throwing Tools: A Guide to Making and Using Pottery Tools for Wheel Throwing Free!
When it comes to throwing pottery on the wheel, having the right tools at the right time makes all the difference in the world. Whether you’re adding profiles, refining curves or just trimming and cutting your work from the wheel, pottery throwing tools make the difference. Here are a few pottery tools that you may already have, but if you don’t, take a look at what you’re missing.
Here’s a sampling of the great articles in Pottery Throwing Tools: A Guide to Making and Using Pottery Tools for Wheel Throwing:
More than likely you’ll get to the point where you’d like to throw multiples of an object. Getting work to look the same when making more than one of an item takes a bit of practice because it’s not as easy as it looks! To help assure you’ll get some sort of consistency on your next set of mugs or bowls, you need a throwing gauge—a way of keeping track of the measurements from the first piece to the last. There are several options for throwing gauges based on designs from both eastern and western cultures, as well as ad hoc solutions that use items around your studio.
Production potters in Europe and America have used throwing gauges for centuries. These usually consist of an adjustable arm on a metal or wooden stand. The arm adjusts in and out as well as up and down for both diameter and height measurements. An example of the Western pot gauge is the Fulwood Measure (figure 1), which features a hinged pointer that breaks away when the clay touches it. Another variation, though not as fully adjustable, can be made from a wood block base drilled at intervals with holes that dowels can slip through. Several dowels can be used at the same time for more complex forms (figure 2).
The Japanese developed a throwing gauge for making duplicates that measures the inside dimensions of a form, unlike the Western gauges mentioned above, which measure the outside dimensions. The tombo (which means dragonfly in Japanese) works well for throwing matching cups, mugs and bowls. Shaped like a lowercase “t,” it consists of a thin vertical piece of wood or bamboo that has a small hole or holes bored through it to accept a stick or dowel. The tombo is held by the top of the vertical stick. The length of the horizontal stick represents the diameter and the vertical length below this stick measures the depth of a vessel. The disadvantage of tombos is that they’re not readily adjustable. On the other hand, they are relatively inexpensive (and even easy to make), so potters usually have several tombos in their collection. Another advantage is that tombos can be used for throwing off the hump.
If you’re just throwing a set or two, you can get by with an improvised tool. When height is not a factor, calipers, a ruler or a marked dowel work well enough to get plates and platters to the same diameter. If height is a factor, as when you’re making cups, mugs and bowls, you’ll need to take an additional measurement and keep track. You can improvise a basic throwing gauge that works for both height and width or throw a piece that you want to duplicate, then set a lump of clay that’s taller than your piece on the wheel worktable and stick a dowel sideways through the clay, so it is perpendicular to your wheelhead at just the right height. Position the dowel so it just touches the rim of the piece you threw.
For this and the articles listed below, download your free copy of Pottery Throwing Tools: A Guide to Making and Using Pottery Tools for Wheel Throwing…
About Ceramic Arts Daily:
Ceramic Arts Daily is a free online website and newsletter written and produced for the benefit of potters and ceramic artists worldwide. The newsletter features both renowned and emerging artists, their work, techniques and artistic perspectives. Regular features include tips and techniques designed to help every artist expand their skill set and widen their artistic horizons. Ceramic Arts Daily also delivers video tips, in which potters and ceramic artists demonstrate various projects and processes. Think of them as e-workshops!
Ceramic Arts Daily is designed to be interactive, inviting your comments and fostering a community in which each person can contribute to the growth of their own and others’ skills. You may be surprised at what you learn!
Ceramic artists on Ceramic Arts Daily know what ceramic art is all about – from functional pottery to abstract ceramic sculpture. This is about community. You’ll be drawn in by artists’ stories, inspired by their work and find confidence to try some of their techniques. With Ceramic Arts Daily, you’ll learn a little bit of everything. Then you can choose the techniques you enjoy the most to create something new!
So start today by downloading our free Pottery Throwing Tools: A Guide to Making and Using Pottery Tools for Wheel Throwing. Then, get ready for Ceramic Arts Daily to introduce you to new artists and show you new techniques!
Leave A Response
You must be logged in to post a comment.