We all have so many different approaches to our own ceramic art that it can feel like we’re coming from entirely different perspectives—and often we are, which is why the conversations we have here on Ceramic Arts Daily can get so interesting. One of the things we all have in common, however, is that we all need to fire our work if we want it to last. Okay, there are some who are experimenting with ideas of permanence and fragility who make raw clay objects solely for the purpose of letting them erode, but that’s the exception rather than the rule. The rest of us need a kiln. Not only that; we need to know how to use it, what it does (and what it won’t do). There are few folks around with as much insight into this aspect of ceramics as Richard Zakin, and in today’s post, he walks us through all the major considerations of kiln performance. If you don’t already have a kiln, read on to find out how to build a sawdust kiln out of readily available materials. In addition, this and more is included in A Guide to Ceramic Kilns: Choosing the Right Kiln Firing Method and Design For Your Art, which is free to Ceramic Arts Daily subscribers. Enjoy!—Sherman Hall, Ceramic Arts Daily
A kiln is a chamber made from refractory (nonmelting) materials. The ceramist places ware in the chamber. Heat created in this chamber (or in a firebox close by) is contained there and so builds up to high temperatures. The ceramic ware undergoes the firing and cooling process. While clay can be fired in an open fire and does not require a kiln, kilns must be used to attain high temperatures. Furthermore, they allow the ceramist excellent control of heat rise and fall and protect the ware during the rigors of the fire. Therefore, almost all contemporary potters use them.
The kiln designer’s job is to make a kiln that keeps its structural integrity over a period of many firings while being efficient and keeping heat loss to a minimum. The kiln must allow the ceramist to efficiently control temperature rise and fall inside the kiln. It must be carefully designed for safe and efficient use of the fuel and must protect the ware during the firing. It must allow the ceramist access for loading and unloading and must have a “spy hole” to provide a view of what is going on inside the kiln during the firing.
This term refers to the oxidizing or reducing properties of the fire. These properties strongly influence the character of the ware.
In the reduction process the ceramist reduces the amount of oxygen allowed to enter the firing chamber. A fuelburning kiln demands a great deal of oxygen: it is very natural for the atmosphere inside a fuel-burning kiln to become depleted of oxygen during the firing. Reduction leaves its mark on both clay bodies and glazes. It modifies color and visual texture. Clay body color is deepened, sometimes moving to rich oranges and reds and sometimes to gray colors. A strong visual texture is created by dark spots that occur in a random but pleasing manner over the surface of the piece. These are caused by particles of iron oxide which have been changed to black iron oxide in the reduction process. Glaze texture and color are also modified. The dark spots that mark the surface of the clay come through to the glaze and mark it as well. Glaze color can be strongly marked by reduction: for example, copper will turn a blood red, white glazes take on a cream color with a broken texture of dark spots, iron greens and ocher colors become burnt oranges and brick reds; sky blues become slate blues.
This post is excerpted from A Guide to Ceramic Kilns: Choosing the Right Kiln Firing Method and Design For Your Art, which is free to Ceramic Arts Daily subscribers.
Flashing occurs because fuel-burning kilns allow the ceramist to subject the work to direct flame. In the flashed area, color will be deepened and the transition from one color to the other may be marked by unpredictable visual effects. Flashing occurs naturally in fuel-burning kilns. The ceramist may heighten the effect by modifying the flame path inside the kiln or by strongly reducing one or two burners in a multiple-burner kiln. Reduced and flashed work is valued for its rich and unpredictable character.
We often associate reduction with the high fire but it is also used in the low fire and can result in very effective surfaces. Low-fire reduction lets us darken and enrich clay surfaces while leaving the surface of the clay completely revealed so that it may speak for itself.
The black pottery of African village potters and the similar work of the Pueblo potters of the Southwestern United States are examples of low-fire reduction. So too are the carbon blackened surfaces we see from some raku firings and sawdust firings.
To carry out a sawdust firing the ceramist packs the work in sawdust in a simple kiln structure, sets the sawdust on fire, and allows it to burn until combustion ceases from lack of fuel.As the sawdust burns, rich patterns of carbon smudging are left on the surface of the piece. Pieces fired in sawdust have a natural and direct quality that can be very appealing. Sawdust firing has the advantage of being economical – sawdust is usually free for the taking.The firing is carried out in a simple firing container rather than in a true kiln. These only require a top and a wall with small openings to allow air to enter and smoke to leave during combustion.
The best thing about the sawdust fire, however, is that the work that comes from it is marked by the fire and this can be very appealing. Furthermore, sawdust firing is very appealing to students new to ceramics, it is spontaneous and can be quickly learned.
Pieces intended for the sawdust fire can be painted first with stains or terra sigillata. The sawdust fire is very effective with these surface coatings and the fire markings are emphasized.
Making a Sawdust Kiln
The sides of the structure should have openings to allow ready access of air to all parts of the densely packed sawdust. If the kiln is made from bricks (common red brick will do) they should be laid without mortar and with openings to allow air to enter. If using a metal garbage can (which works well) pierce the sides with a sharp tool to allow the entry of air.
Firing a Piece in the Sawdust Fire
You Will Need:
- Piece suitable for sawdust firing (strong and compact in shape and you may wish to bisque fire it first
- Sawdust kiln
- Sawdust to fill the kiln
- Metal lid for the kiln
- Place a layer of sawdust in the base of the kiln.
- Place the pieces to be fired in the kiln and surround them with sawdust. If you wish the fire to proceed fairly slowly (the safest option), pack the sawdust fairly tightly around the pieces.
- Cover the pieces with a layer of sawdust.
- Place the metal lid over the kiln, temporarily leaving a gap of a few inches to create a bit of a draft.
- Start the fire with pieces of paper and let this burn for a few minutes.
- Close the lid of the kiln.
- During the first hour check the fire periodically and restart it if necessary. After 30 minutes the fire should be well enough established to stay lit until all the sawdust has burned.
- Unload the pieces the next day and brush off any burned sawdust.
- Lightly wet the pieces and wax and buff them. If a piece is too delicate to wax and buff, spray it with a transparent acrylic medium or a liquid wax.
The Pottery of African Village Potters
African village potters create a low-fire reduction ware whose surface is a rich, lustrous, dark black. The work is fired in the open in impromptu firing structures composed of the pots plus shards and fuel. Firing takes place over a very short period – perhaps an hour or two. The method differs from sawdust firing in that at the end of the firing, the potters pull the still hot work from the fire and pour oil over it. The oil quickly burns and stains the surface of the piece carbon black. This is polished and the piece is done. The surface color is more uniform than that from a sawdust fire. Although this method is very simple, the resulting surface is very elegant and effective.
In this kind of firing oxygen is allowed free access to the kiln chamber. In the past this was not so easy, wood-fired kilns naturally went into reduction during the firing. Even then not all ceramists fired in reduction. For example, lead glazes boil and bubble in reduction. Ceramists who finished their pieces with lead glazes took the trouble to control their kiln firings and avoid reduction.With the advent of modern kilns it became very easy to fire in oxidation. Fuel-burning kilns, whose burners are fan driven, lend themselves to oxidation firing. The very popular electric kilns not only lend themselves to the oxidation fire; most of them are not designed to be fired in reduction at all.
The contemporary ceramist must decide whether to use an oxidation or reduction firing atmosphere. This will dictate the choice of a kiln. Neither oxidation nor reduction is superior; both are tools to be used by the ceramist when appropriate.Click here to leave a comment