Heater for studio Rinnai gas powered?
#1
Posted 19 February 2013 - 05:57 AM
#2
Posted 19 February 2013 - 10:07 AM
Jim
"But it does move," said Galileo under his breath.
#4
Posted 19 February 2013 - 07:28 PM
Dry Ridge Pottery
#5
Posted 19 February 2013 - 08:00 PM
http://www.youtube.c...h?v=XsF9RvVxFc4
#6
Posted 19 February 2013 - 10:16 PM
#7
Posted 19 February 2013 - 10:28 PM
smastca, on 19 February 2013 - 08:00 PM, said:
http://www.youtube.c...h?v=XsF9RvVxFc4
Interesting. Thanks for posting it.
Jim
"But it does move," said Galileo under his breath.
#8
Posted 20 February 2013 - 12:53 PM
I used an old kerosene heater for overnight to prevent freezing. Then a wood stove during the day.
Down in South Texas, I don't have heat, just A/C.
Marcia
#9
Posted 21 February 2013 - 06:17 AM
Marcia Selsor, on 20 February 2013 - 12:53 PM, said:
I used an old kerosene heater for overnight to prevent freezing. Then a wood stove during the day.
Down in South Texas, I don't have heat, just A/C.
Marcia
I've thought of a kerosene heater but apparently they are illegal in Massachusetts. Someone told me to cross into Connecticut and just buy one there, but I guess it made me a little nervous. I also thought of a wood stove but I don't think I can spare the room. The whole studio is only 10 x 12' , And in such a small place id probably get blasted out by the heat if i did have one in there. We have one in the house though, which works wonderfully.
#11
Posted 21 February 2013 - 09:30 AM
Marcia Selsor, on 21 February 2013 - 09:08 AM, said:
Marcia
I looked a few up quickly online and this looks like a promising option. Thank you! I am hoping to find one that works on propane since it seems easier to procure than kerosene (which I always think of as a dirty type of fuel, but maybe I am wrong?). I will do more research when I have time. I like the idea of no blower very much.
Thanks again!
#12
Posted 21 February 2013 - 04:09 PM
Potter friends had one of these in their studio. I liked it so much I bought it from them when I retired.
Duraflame Electric Infrared
Dry Ridge Pottery
#13
Posted 21 February 2013 - 05:54 PM
#14
Posted 21 February 2013 - 08:20 PM
#15
Posted 21 February 2013 - 08:27 PM
Mark
www.liscomhillpottery.com
#16
Posted 21 February 2013 - 10:34 PM
http://www.homedepot...s&storeId=10051
Alice
#17
Posted 21 February 2013 - 11:47 PM
atanzey, on 21 February 2013 - 10:34 PM, said:
http://www.homedepot...s&storeId=10051
Alice
I have a brick garage that is separate from the house, single car. I have to have heat over night whenever I am working so that the temp of the bricks does not get to cold. I use a plug in infrared box for that. During working hours in the winter I also run a garage heater-wired in 220V. The two of these will get the garage up to 58-60F. on cold days, I wear insulated pants and base layer 2 tops to work in. Cold so most of the time I work more in the Fall, Spring and Summer. However, I have some orders I need to get out so I have been running the heat-still cold.
#18
Posted 22 February 2013 - 08:24 AM
atanzey, on 21 February 2013 - 09:34 PM, said:
http://www.homedepot...s&storeId=10051
Alice
That looks pretty good. Is the fan subtle?
Marcia
#19
Posted 22 February 2013 - 09:22 AM
#20
Posted 22 February 2013 - 10:39 AM

Sign In
Register
Help











MultiQuote










