Ideas for ugly pots?
#1
Posted 06 February 2013 - 12:23 AM
#2
Posted 06 February 2013 - 12:36 AM
treehouse, on 05 February 2013 - 09:23 PM, said:
Love the idea.
I'm now hammering the pieces. It's quick and can't be taken back. That way I can keep and display ones that I'm proud of and enjoy looking at....
Visitors are not distracted by them either so it's a win, win situation.
#3
Posted 06 February 2013 - 01:42 AM
Mark
www.liscomhillpottery.com
#5
Posted 06 February 2013 - 07:02 AM
You can always make pavers by embedding big chunks of fired ware into concrete (there are molds you can buy). Sorry if there are errors in this post I am doing this from my phone.
#6
Posted 06 February 2013 - 09:05 AM
treehouse, on 06 February 2013 - 12:23 AM, said:
Years ago, I had a bunch of pots that were "substandard". I really did not want to throw them out, so I put them in my mom's rock garden that was quite large. They fit right in, and over the years as they froze and broke, we left them there until they were pretty much gone. They added some "fairy like" interest to the garden.
#7
Posted 06 February 2013 - 09:10 AM
I have smashed a lot of stuff in my time. Didn't keep any to hang around and remind me of my bad decisions.
Start today.
TJR
#8
Posted 06 February 2013 - 10:19 AM
Lucille Oka, on 06 February 2013 - 06:02 AM, said:
You can always make pavers by embedding big chunks of fired ware into concrete (there are molds you can buy). Sorry if there are errors in this post I am doing this from my phone.
Don't save the bad ones--I sure don't want to be represented solely by my mistakes. Study your mistakes, learn from your mistakes, and then smash them.
#9
Posted 06 February 2013 - 11:25 AM
Mea
#10
Posted 06 February 2013 - 11:56 AM
I smash mine ... my neighbor likes using the shards in her ground cover since it keeps the small animals away from her flowers.
Contemporary Fine Colored Porcelain
www.ccpottery.com
"My Artwork would not exist without a thriving global pottery community.
In the isolation of a studio, an artist can begin to feel like an island, but in truth
we are all part of archipelagoes; chains of islands loosely connected by a stream
of information that enhances our Artwork.”
#12
Posted 06 February 2013 - 01:48 PM
Edie
#14
Posted 06 February 2013 - 08:43 PM
justanassembler, on 06 February 2013 - 07:19 AM, said:
Lucille Oka, on 06 February 2013 - 06:02 AM, said:
You can always make pavers by embedding big chunks of fired ware into concrete (there are molds you can buy). Sorry if there are errors in this post I am doing this from my phone.
Don't save the bad ones--I sure don't want to be represented solely by my mistakes. Study your mistakes, learn from your mistakes, and then smash them.
No!! Wait!
I purchased a book solely about 'wasters' and they can be wonderful and museums dedicate entire study halls to them. If you do not think the 'ugly' work is good now it will be a thousand years from now. Many of the ancient wares are wasters. There are excavations going on in many areas of the world trying to uncover wasters.
Just knowing that the work I am doing now will possibly be around for someone to see thousands of years from now is thrilling. Discovering wasters will be a real treat for the anthropologists and archaeologists they will not care if the pots are 'ugly' or not they will be happy just to find it just like they are today.
At least get a second or third opinion from family and friends before you get rid of anything.
#15
Posted 06 February 2013 - 09:03 PM
If it did have some potential but got ruined by glazing, we can reglaze it, right?
On the other hand, mistakes are good! My best vases so far got out of some sort of mistakes I made (wrong move, shaken table).
... I am just learning, though.
#16
Posted 06 February 2013 - 10:45 PM
TJR, on 06 February 2013 - 09:10 AM, said:
I have smashed a lot of stuff in my time. Didn't keep any to hang around and remind me of my bad decisions.
Start today.
TJR
That's how I'm leaning, thanks TJR for the nudge!
#17
Posted 06 February 2013 - 10:47 PM
Claypple, on 06 February 2013 - 09:03 PM, said:
If it did have some potential but got ruined by glazing, we can reglaze it, right?
On the other hand, mistakes are good! My best vases so far got out of some sort of mistakes I made (wrong move, shaken table).
... I am just learning, though.
So true, that is what I'm doing now, I don't fire anything I'm not completely satisfied with, and luckily those pots are getting to be more and more numerous!!
#19
Posted 06 February 2013 - 10:49 PM
Lucille Oka, on 06 February 2013 - 07:02 AM, said:
You can always make pavers by embedding big chunks of fired ware into concrete (there are molds you can buy). Sorry if there are errors in this post I am doing this from my phone.
Cool idea to bury a couple, I'm going to do that, but only good ones!
#20
Posted 10 March 2013 - 09:40 PM
Mark C., on 06 February 2013 - 02:42 AM, said:
Mark
My college did this, we had the smash wall ... students could break their nasty pieces there and leave it ... after a few years a company would come and haul it off for construction filler. Good stuff.
smash it, make more. you're not keeping it cause it's you're first borns creations ... you're keeping it because you made it ... guess what, you can make more (and hopefully better) smash it and move on. It's theraputic and cleansing. win win.

Sign In
Register
Help










MultiQuote






