Page 1 of 1
Crossing My fingers!
#1
Posted 17 January 2013 - 10:50 AM
I decided to fire up the kiln again. I have it packed with some Medium Fire stoneware and since I can't find my cone 04 cones (I swear I ordered some) I am using cone 05. From what I read it might help with better absorbtion of glaze anyways. I am keeping a log every time I change something like I did last time.
I hope I didn't make a mistake by stacking some of the pottery pieces. I know that many people do this but I am nervous about it.
I hope I didn't make a mistake by stacking some of the pottery pieces. I know that many people do this but I am nervous about it.
Learning On my Kick wheel with my vintage Paragon (from the late 1960's)
#2
Posted 17 January 2013 - 10:55 AM
rebbylicious, on 17 January 2013 - 09:50 AM, said:
I decided to fire up the kiln again. I have it packed with some Medium Fire stoneware and since I can't find my cone 04 cones (I swear I ordered some) I am using cone 05. From what I read it might help with better absorbtion of glaze anyways. I am keeping a log every time I change something like I did last time.
I hope I didn't make a mistake by stacking some of the pottery pieces. I know that many people do this but I am nervous about it.
I hope I didn't make a mistake by stacking some of the pottery pieces. I know that many people do this but I am nervous about it.
Hopefully This time I don't screw it all up!!
Learning On my Kick wheel with my vintage Paragon (from the late 1960's)
#3
Posted 17 January 2013 - 12:16 PM
Stacking pieces in a bisque firing is perfectly normal. You can stack them inside each other, as long as the pot on top contacts the bottom of the pot it sits in, so the weight is carried by the foot, not the lip. You can also stack foot to foot or lip to lip. You can lay pieces on their sides, or fire them upside down.
Neil Estrick
Kiln Repair Tech
L&L Distributor
Owner, Neil Estrick Gallery, LLC
www.neilestrickgallery.com
neil@neilestrickgallery.com
Kiln Repair Tech
L&L Distributor
Owner, Neil Estrick Gallery, LLC
www.neilestrickgallery.com
neil@neilestrickgallery.com
#4
Posted 17 January 2013 - 01:08 PM
neilestrick, on 17 January 2013 - 11:16 AM, said:
Stacking pieces in a bisque firing is perfectly normal. You can stack them inside each other, as long as the pot on top contacts the bottom of the pot it sits in, so the weight is carried by the foot, not the lip. You can also stack foot to foot or lip to lip. You can lay pieces on their sides, or fire them upside down.
yikes!! I do know that I put a pie plate (thin) on top of a bowl that I made thicker. I hope that doesn't mean I will have collapsed items. Going to turn it up to medium now.
Learning On my Kick wheel with my vintage Paragon (from the late 1960's)
#6
Posted 17 January 2013 - 06:39 PM
well, it shut off about 45 minutes ago. I cannot wait to open it up in the morning and see what is in store!
I also realized that I needed to order some cone 5 for the glaze. I only had 4 and 6.
Learning On my Kick wheel with my vintage Paragon (from the late 1960's)
#8
Posted 17 January 2013 - 08:24 PM
Mark Cortright
www.liscomhillpottery.com
www.liscomhillpottery.com
#9
#11
Posted 18 January 2013 - 10:45 AM
I had my first official successful bisque firing - I opened up the kiln this morning!
I fricking cannot wait to have my first successful glaze firing!! (just need to glaze them this weekend and hopefully my cone5 cones show up! I owe my father in law a coffee cup in exchange for the kiln, so I hope to have it done before i see him tuesday.
I fricking cannot wait to have my first successful glaze firing!! (just need to glaze them this weekend and hopefully my cone5 cones show up! I owe my father in law a coffee cup in exchange for the kiln, so I hope to have it done before i see him tuesday.
Attached File(s)
-
pots1.jpg (110.47K)
Number of downloads: 51
Learning On my Kick wheel with my vintage Paragon (from the late 1960's)
#12
Posted 18 January 2013 - 10:52 AM
I have to admit- the large bowl in the back is hidden because it was perfect on the wheel, and stupid me forgot to use a bat.. so it colapsed in itself when I took it off. so i manually put it back up. It's warped and uneven.
Learning On my Kick wheel with my vintage Paragon (from the late 1960's)
Page 1 of 1

Sign In
Register
Help











MultiQuote




