Studio Floor Covering
Posted 13 December 2012 - 12:40 PM
Posted 13 December 2012 - 03:42 PM
I too work from a big shed which has a raised wooden floor. About fifteen years ago (when it was new) I covered the wooden floor with the foil/foam stuff you use under laminate flooring and then covered that with cushion-floor linoleum .... this meant I could cover the whole floor area with no joins, although I did have a bit left over down the side. The advantages of this type of flooring are (a) it's comfortable to stand on for long periods of time (b ) it's warm and ( c) (which is probably the most important one) it's very easy to wash down and keep clean. I keep heavy glaze and slip buckets on wooden stands with casters on the bottom and these trundle nicely over the cushion-floor and it's served me very well and looks almost as good as it did the day I laid it
Hope this helps
Posted 13 December 2012 - 05:12 PM
Dry Ridge Pottery
Posted 13 December 2012 - 05:44 PM
I bought a pair of fleece lined pants for winter work in the shop, these are really comfy for most work. Heavy hunting socks work well to keep feet warm, and in the end the small heater overnight helps to keep the brick from holding too much heat. PA winter so far is not too bad, but nights are in the 20's now so it takes a while to heat things up unless preheated.
Posted 14 December 2012 - 10:31 AM
Posted 14 December 2012 - 11:16 AM
Posted 22 December 2012 - 10:48 AM
Years ago, when Ceramics monthly came in a plane brown cover wrapper, people would ask me what I was carrying/reading. My answer was Clayboy magazine! Always got a chuckle from folks!
Posted 23 December 2012 - 03:33 PM
ours come from the local box store
how do these soft tiles clean. i now have scrap vinyl flooring which cleans up very well, but i am interested in the soft tiles. can one brush them with a wet mop or vacuum them with a wet dry vac. hope to get some more info
Posted 06 January 2013 - 09:02 AM
The floor is insulated (closed-cell foam between the joists), BTW. I'm hoping to avoid that cold-foot problem y'all are having!
Posted 06 January 2013 - 01:13 PM
Posted 06 January 2013 - 07:28 PM
What have people out there used to coat a cement floor?
Seems that the paint Mark posted about should work for cement as well - thoughts?
Posted 06 January 2013 - 08:30 PM