Silicon carbide Kiln Shelves non stick?
Posted 19 November 2012 - 01:46 AM
Posted 19 November 2012 - 07:40 AM
Glazes will soak into the porous surface of a silicon carbide shelf. I have always put kiln wash on them in regular stoneware firings and for soda firing I use a high alumina content kiln wash.Glazes melt period. They will stick to whatever surface they come into contact with during the molten phase of the glaze. Think of karo syrup only not as benign.
Posted 19 November 2012 - 07:45 AM
glaze will stick to anything it touches when it is molten. Think flowing lava. Stainless Steel may melt at 2750 but what does it do or what is it's state at 2300? Try putting a small test piece into a firing and see what it looks like when it comes out. It will not resist the glaze.
Posted 19 November 2012 - 12:05 PM
As far as silicon carbide shelves they will soak up glaze like a sponge and you will need wash on them-now lets talk about the stainless-what is your firing temp?? I am assuming its cone 10 but regardless you will find stainless a very poor choice in sheet form on top of a kiln shelve . Please test a small chunk first so that way the disaster will just be a test. Pots do not need the foot glazed as the foot is the support base in visual and functional terms.
One last not if you still want your bottoms glazed find a salt kiln as the wadding supports make for the pot bottoms to have a coating of glaze on them (except for the 3 wadding support spots)
Posted 20 November 2012 - 12:42 PM
Kiln Repair Tech
Owner, Neil Estrick Gallery, LLC