|Start with the mylar paper and cut it in a 10-inch square. Then cut across the diagonal. This will make two cones. Larger cones can also be made in a similar way but smaller cones are easier to handle.|
|Place your finger in the center of the diagonal and start turning the cone between your fingertips. Keep turning to make the cone until you have turned the triangle into a cone with a tight tip. Keep the tip of the cone tight with your fingers. Tape the seam on your cone and your cone is done.|
|To fill the cone with slip, use a flavor injector. Just fill the cone up to two thirds.|
Download your free copy of Seven Great Pottery Projects now to learn more great techniques like this one!
|Fold the seams very tight with tape. The cone should feel almost solid and not squishy.|
|When ready to use, just cut the tip off very slightly. Nail clippers work best.|
|Use the trailer to apply your decoration. You will hardly need to apply pressure and the slip will flow smoothly. Once you feel that the cone is going limp, fold the top end again and tape it to make it tight and stiff. Keeping the cone tight and solid is the key. You will hardly need to use pressure, so there is no strain on the thumbs. No air enters into the cone, so there is no spitting. The only disadvantage to these is that you can’t reuse the cones. But they are very easy and cheap to make. Just pop in your favorite DVD and make a bunch of these.|
Download your free copy of Seven Great Pottery Projects today!
To see some of Charan Sachar’s slip-decorated work made using these cones, visit http://creativewithclay.etsy.com.