- Ceramic Arts Daily - http://ceramicartsdaily.org -

Using Colored Clay and Etching Techniques to Explore Patterns and Textures on Functional Pottery

Debra Oliva’s work is inspired by a Samurai warrior’s suit of armor, which she saw on a visit to a museum. Impressed by the combinations of grays, blacks, and browns, as well as the patterns, textures, and fine details, Debra knew she had to work these elements into her clay work.


She does this by throwing in sections with different colored clays, painstakingly etching surface designs, and adding more color with underglazes and terra sig. In today’s post, an excerpt from the September 2012 issue of Ceramics Monthly (coming soon to a newsstand or mailbox near you!), Debra explains her process. – Jennifer Harnetty, editor.


 During a visit to a museum I discovered a Samurai warrior’s suit of armor. It was an amazing combination of woven fabrics, leather, and metal. I was taken by the subtle combinations of grays, blacks, and browns, and the relationships between the many patterns and textures, the fine details, and impeccable craftsmanship. This garment presented a clarifying moment that helped me identify the aesthetic I would follow, the elements that are important to me, and where I might look for inspiration.



When developing new forms, I consider the proportions of the color sections and the placement of decorative elements. Next, I make a rough drawing as a guide and go to the wheel to make a few prototypes to work out the form and get comfortable making the piece. Estimating the amount of clay I will need, I throw the bottom section and finish it with a level rim. I take a measurement of the rim diameter and set it aside while I throw the next section.


I begin the etching process at the leather-hard stage, working on a small section while keeping the rest of the piece damp and covered. My etching tools include a pin tool, pencils, scoring tools, drill bits, and serrated ribs that I cut into small pieces and insert into X-Acto blade handles (4).


click to enlarge

For the line work, I begin by dividing the space, making a small mark where a line will be drawn. With the piece spinning slowly on the wheel, I incise horizontal lines using a pin tool. Then I incise vertical and diagonal lines by eye. If there are elements to transfer, I use a sharp pencil and a light touch, to transfer designs from tracing paper to the leather-hard ware. I then retrace the patterns to incise them more deeply into the surface. To etch pattern areas, I use my home-made tools.


This post is an excerpt from an article in the September 2012 issue of Ceramics Monthly.
Subscribe today for online access to this issue including this full article!


Firing and Finishing After bisque firing, I lightly sand the piece with fine grit sandpaper to remove any burrs that may still be remaining from the etching process and the dust is wiped off. I brush terra sigillata or commercial underglaze into the incised lines or areas and sponge the excess away (5). I glaze the interior with a black or clear glaze and fire the work to cone 8 in an electric kiln. After the glaze firing, I apply a durable, food-safe wax product to the unglazed exterior and buff it to a soft sheen with a shoe shine brush.


click to enlarge

Working with clays colored with varying amounts of oxides and stains can be challenging as the color sections dry and flux differently. This may create tension between the sections, which could result in warped rims, often only becoming apparent after the final firing. These pieces are unacceptable to me; however, because of this uncertainty and inevitable loss, successful pieces are that much more rewarding.


To see more of Debra Oliva’s work go to www.debraolivaceramics.com. Check out Curt Benzle’s video clip Tips and Techniques for Making your Own Colored Clay for a way to mix your own colored clays using one clay body as a base, to avoid loss due to different shrinkage rates between the clays.


 For more interesting carving techniques, download your free copy of Ceramic Carving Tool Techniques: Bringing the Ceramic Surface to Life.