Carpal Tunnel Syndrome is all too familiar to ceramic artists, especially those who work on the pottery wheel. But even those who don't use the wheel can run into stress and strain on their wrists from wedging pottery clay. So it is nice to hear about alternatives to the traditional wedging method. One such alternative is stack-and-slam wedging, a method that involves, basically, stacking clay pieces, slamming them down on the wedging table, cutting with a wire and repeating the process. This technique can also be used to work wet clay into clay that has dried out a bit too much.
Today, in an excerpt from our free download Successful Tips for Buying and Using Pottery Clay: How to Select the Right Clay, Estimate Your Clay Needs, and Test Clays for Better Results, Michael Wendt gives step-by-step instructions on how to effectively use this method for wedging clay. - Jennifer Harnetty, editor.
Wedging Pottery Clay (and saving your wrists!)
by Michael Wendt
Stack-and-slam wire wedging is a method for wedging that is quick, effective, versatile, and easier on the hands and wrists than any other type of manual wedging. This method allows you to uniformly wedge very large pieces of clay for large pots.You also can add water (or softer clay) to pieces of clay that have become too stiff, or even mix clays with different characteristics such as stoneware and porcelain. In addition, this method offers a superior way to get perfectly flat slabs for tile work or handbuilding.
To illustrate this method, I took two 3-pound balls of pottery clay of different colors and spiral wedged them for two minutes. I sliced through the ball to see how uniform the mixing had become. After two minutes of spiral wedging, there were still pockets of red and white clay in the pink mixture that had not been completely dispersed.I repeated the exercise with two more balls of different colored clays using the stack-and-slam wire-wedging technique. The bottom photos show the remarkable change that took place.
Vince Pitelka’s Clay: A Studio Handbook has been an essential, all-inclusive studio text for students, studio artists, educators and all those interested in the art of clay since it was originally published in 2001. Now it is back fully updated, expanded, and better than ever with beautiful color images! Clay: A Studio Handbook addresses the full range of ceramic processes and brings a lifetime of ceramic knowledge directly into the hands of potters. Buy Clay: A Studio Handbook today and be a better potter from this day forward.
The Stack and Slam Wedging Process
Choose a comfortable amount of clay for the first attempt. I seldom wedge less than 3 pounds because it is too slow to wedge each piece one at a time. I prefer to wedge enough clay for several pots at one time because, with this stack-and-slam wire-wedging technique, it is just as easy to wedge a large amount as it is to wedge a small amount.
First, block the clay into a rough rectangular shape.
Once you have completed the required number of cycles, place your left hand on the top of the piece and roll it to the left onto its side. Now your right hand can be placed on the area that was the bottom on the table surface. The goal is to keep track of these two surfaces while converting the block into a cylinder by repeatedly tapping it onto the table surface and finally rolling it round.
Taking this extra step assures you can keep track of the laminated face. I have found that orienting the laminations parallel to the wheel head minimizes cracks on the bottom of all of my pieces, and that selecting the smoothest end for the top further reduces losses.
Changing Softness of Clay
Sometimes clay is too hard for our liking. Water can easily be added with wire wedging resulting in the right feel every time. Slice the block first into thin sheets. Spread them onto the table surface and spray with water. Restack and wedge as explained or mix some softer clay with the harder clay. This lets you reclaim pots that have failed rather than drying them out and reusing them later. If some of your pugs are too hard and others are too soft, weigh out different proportions of stiff and soft clay. Record the amounts so that you can gauge how much needs to be added the next time.
If you're already happy with the results from your current wedging or pugging, there's no reason to change. But if you're struggling with uneven clay and would like a method that gives you more control, try wire wedging. It can create some troubles if done improperly -- most notably, the introduction of air pockets due to poor joining surface quality -- but this is easy to diagnose and cure. I have used this method for over thirty years and have no wrist or hand problems.
This article is included in Successful Tips for Buying and Using Pottery Clay: How to Select the Right Clay, Estimate your Clay Needs, and Test Clays for Better Results, which is free to Ceramic Arts Daily subscribers.