If you are looking to buy a kiln, you will need to consider a kiln vent too. Typically we think of kiln vents as primarily a health and studio safety precaution, but a proper kiln ventilation system benefits both the work inside the kiln and the people (and don’t forget studio pets!) around it. In addition, kiln venting is good for your kiln!
PS. Learn more about the problems caused by not venting a kiln, and how to properly use and care for your kiln vent in the April 2017 issue of Ceramics Monthly!
A Handy Guide to Kiln Vents
by Dave Finkelnburg
Why Vent a Kiln?
Kiln vents are primarily used to protect the health of people around the kiln. An additional benefit is that a vented kiln produces cleaner firings, ultimately contributing to brighter glaze colors and fewer glaze faults. A kiln vent system can also be used to cool the kiln more rapidly, but in a controlled manner.
All kiln firings produce fumes by burning off organic material from either the clay body or glazes. The fumes produced in any firing are water, carbon, sulfur compounds, and potentially heavy metals if the firing temperature is hot enough and volatile metals are present. Carbon is mostly carbon dioxide, but also a little carbon monoxide. Other volatile carbon compounds can come off early in the firing. Most carbon compounds come from the organic materials in the clay body, but some carbon dioxide comes from decomposition of carbonates (whiting and dolomite) late in the firing. However, any gum or other organic material added to a glaze also contributes organics to the kiln atmosphere, as do oils used if one is firing overglazes. Sulfur compounds burn off from pyrite, a minor contaminant in clays. Without proper kiln venting, these vapors will leak into the kiln room and become a health hazard.
Sulfur fumes are particularly irritating, producing a burning sensation in the eyes, nose, and lungs. Organic burnout produces compounds that can be harmful for a variety of reasons. The most immediate hazard is the potential for carbon monoxide to be present in the kiln fumes.
This fourth edition of Electric Kiln Ceramics, has been completely rewritten, reorganized, and expanded by Frederick Bartolovic. Loaded with new color images that highlight some of the most beautiful results possible with electric firing, the new edition features step-by-step instruction on forming and finishing pieces for electric firing, schedules for firing both manual and computerized kilns, and even glazing techniques and recipes to try out in your electric kiln.
How Does Kiln Venting, or Not, Affect the Fired Work?
When we say organics and sulfur burn, that means they react with oxygen in the air in the kiln to produce carbon, hydrogen, and sulfur oxide compounds. Those chemical reactions reduce the amount of oxygen in the kiln atmosphere. An unvented kiln can thus go into reduction while these reactions take place. In this situation, the organics and sulfur do not have enough oxygen to burn away. These unreacted materials thus can remain to cause clay and glaze faults (like black coring and pinholing) and murky appearing glaze surfaces. By using a kiln vent, the oxygen-deficient kiln vapors are removed and replaced by oxygen-rich air from the kiln room.
Direct kiln vents ensure there is an abundance of oxygen inside the kiln, producing clean burnout of oxygen and sulfur compounds which, if not removed completely, can contribute to glaze faults later. In addition, a strong oxidizing atmosphere in the kiln produces brighter glaze colors, particularly with shades of iron red, yellow, and brown. This is why it is important to use a kiln vent even if it is located outside. A properly vented kiln assures a more reliably oxidizing atmosphere within the kiln, which is helpful to the finished appearance of the work.
How Kiln Vents Work
There are several excellent kiln venting systems on the market. They can be separated into two simple categories. One is hood-type venting and the other is direct venting.
A kiln vent hood is installed above the kiln and operates in the same way an exhaust hood works above an ordinary kitchen stove. An exhaust fan inside the duct leading from the hood to the outdoors pulls air in from around the kiln beneath the hood.
A hood exhaust collects fumes that escape the kiln. It also removes a significant volume of room air. The efficiency of such a system depends on the volume of air drawn through the kiln vent hood relative to the volume of the room, and also on whether there are other drafts in the room that can disrupt air flow into the hood. A proper kiln vent hood relies on an adequate amount of makeup air being allowed to flow into the room, either under doors, through open windows or doors, or through inlet vent openings in a room wall or roof.
Kiln vent hoods are most useful at protecting people in the kiln room from harmful gases coming off the kiln during a firing. They are not necessarily completely effective at removing all kiln fumes from a kiln room. Because of their design, they do not pull fumes out of the kiln itself.
A direct vent uses a fan or blower to pull air both from the room and directly from the kiln. This is done by connecting an exhaust fan to the kiln using a duct and a fitting that mounts over one or more very small holes in the kiln wall or, more often, the kiln floor. To pull some air from the kiln requires that the same amount of air has to be flowing into the kiln somewhere else to replace the air flowing out.
A common arrangement involves mounting the exhaust fan on a wall or stand near the kiln. A flexible hose connects the suction side of the fan to a housing over a small vent hole in the center of the bottom of the electric kiln. The exhaust duct is routed outside the kiln room, either through the roof or through a wall away from any windows, doors, or air intake openings.
The housing either has several holes in it to admit room air, or it is mounted with a small gap, typically ¼ to ³⁄8 of an inch, between the housing and the kiln bottom. When the fan is running, it draws a small volume of air from the kiln and a larger volume from the room at the same time. The room air mixes with the kiln vapors to cool them enough so the exhaust duct is not hot.
A squirrel-cage wheel on the fan, also called a centrifugal fan, is most common (rather than a propeller fan, known as an axial fan). That’s because the squirrel-cage fan will move a similar amount of air despite moderate restrictions on the inlet or outlet of the fan. Air flow from a propeller fan, on the other hand, will fall if there are restrictions on the fan inlet or exhaust.
Don't forget to download your free copy of our Guide to Ceramic Kilns: Choosing the Right Kiln Firing Method and Design For Your Art. This Ceramic Arts Daily Guide can help you choose the type of kiln atmosphere you want (oxidation or reduction), the type of fuel you want to use (oil, gas, electric, or wood) and maybe even the special surfaces you want (salt, soda, raku, or pit).