- Ceramic Arts Daily - http://ceramicartsdaily.org -
Don’t Forget the Details: The Importance of Considering How Your Pots Function When In and Out of Use
Posted By Debra Lee On September 12, 2011 @ 11:25 am In Daily,Features,Functional Pottery | 6 Comments
Most potters spend a lot of time thinking about how things, particularly pots, function. Is the lip of this mug comfortable to drink from? Does this teapot spout dribble after pouring? To make high quality work, all potters should ask themselves these types of questions. But what does handmade pottery do when you are not using it? Gay Smith argues that it still has a function, which is to be stored conveniently and efficiently.
In today’s post, an excerpt from our brand-new free download Contemporary Pottery: Functional and Conceptual Considerations for Handmade Pottery, Gay explains how to think about pottery design from the perspective of the end users and how they see handmade pottery fitting into their lives —- and their cupboards. – Jennifer Harnetty, editor.
The Function of Storage
The desire to create pots that could stack was inspired by my need as an avid pottery collector to find space for new pots. They stack up tall and compactly, requiring minimal horizontal space in your cabinet. The bowls are squared for structure because this gives the stack greater stability. The main functional concern with making pots to stack is that the diameter of the foot will slip easily into the diameter of the rim of the piece below it, and that the foot will not rest on the interior floor of the piece below it. Rims are measured with calipers as I throw them so that when they’re squared, I know that hip will meet lip. This way, when making a stack, each pot will rest upon the one beneath it without rocking or keeling over.
How and where each pot touches the one above and below it is both an important structural consideration in how they stack, as well as an important visual decision. The stack is a series of individual pots piled one on top of the other, but just as importantly, the stack is a unit, one piece, a kind of interactive sculpture.
Through use, bowls will layer differently every time they are put away in a stack. Depending upon the configuration, color and pattern can be either intentionally or randomly reordered. The squared hip or belly of the bowl has more visual impact for presenting a “flat” face in the sense that the stack might be read as a two dimensional image. Thus the stack is less able to be directly interpreted as round. I imagine the face of the stack as a constantly changing painting made by the user. Each bowl is intentionally different from its neighbor. The user will perhaps develop favorites, or choose to use one over the other depending upon mood. I imagine bringing a sense of fun and celebration into the use of these bowls.
I texture the surfaces by rhythmically impressing carved wooden blocks into the clay as I throw each bowl. The blocks were acquired from a fellow Penland teacher in 2005. I was told they were from India and were used to print fabric by hand. Their carving is extremely intricate. So, the surface texture is a collaboration with unknown, highly skilled craftsmen. The beauty of the patterns they create is a gift from these unsung artisans. I am grateful to them.
The exterior surface of the bowl is lightly ribbed to provide a smooth canvas for the marks, and the blocks are dipped in water prior to each impression, which actually prevents their sticking to the pot wall. The pot wall must not be too thin for impressing, an advantage when stacking as it means rims will not chip. I am looking to create an interesting tactile surface with a repeating visual and tactile pattern around the exterior hip or belly of the bowl. The texture finds its way to the interior of the bowl with soft finger marks from resisting the exterior pressure of the pattern-making.
The textured surface means the pieces are easier to handle when hot or cold, keeping fingers dancing about with something to grip. But I’m actually more interested in the textured patterning to provide engaging, tactile pleasure or experience. And the indentations provide me with places to inlay glazes or slips. After darting and trimming, I raw glaze the pieces by dipping the textured portion of each bowl in a glaze or slip. The liquid settles in the indentations and I use a soft rubber rib to wipe away excess while it is still wet. Then another glaze (or not) is layered over this when the pot has set up enough to take the next dip. This layering gives the rich colors to the surfaces that I am seeking, and emphasizes the shapes and patterns in the textures. They are abstracted and impressionistic.
When the rim of the bowl is still flexible but the overall consistency is a soft leather hard, I mark the rim into four even sections. Then, I take four triangular darts out to alter the rim of the bowl from a circle into a soft square. After reinforcing each seam with a coil, the bowls dry slowly under plastic until they are ready for trimming. A round pedestal foot is trimmed under each pot. I make sure that the foot is not too high so that the foot does not touch the floor of the bowl under it when stacked.
Article printed from Ceramic Arts Daily: http://ceramicartsdaily.org
URL to article: http://ceramicartsdaily.org/ceramic-art-and-artists/functional-pottery/dont-forget-the-details-the-importance-of-considering-how-your-pots-function-when-in-and-out-of-use/
Copyright © 2008-2012 Ceramic Arts Daily. All rights reserved.